BSA 68mm Bottom Bracket (Threaded)
BSA 68mm Bottom Bracket (Threaded)

Customer Reviews

Based on 7 reviews
86%
(6)
14%
(1)
0%
(0)
0%
(0)
0%
(0)
j
james omalley (Dallas, US)
Reliability 4031 bike

The crank bearing gave out at about 4000 miles, so I guess that is OK. But the derailler that came with the bike started failing on the GAP and C&O trail ride with about 2000 miles on it. The bike shop told me that another supplier had better kit and replaced it with non OEM, 2000 mile now it still works. Also I have 700c and 650B wheel set and am having major spoke issues, they started at about 1000 miles for each wheel set (it sucks to have failure on the trail), my mass is 200 lbs, and I also have packs for the bike. So their is room for improvement with the State 4130, reliability should be the highest priority, if we wanted speed we would buy another manufactures bike.

A
Aaron Granquist (Denver, US)
No More Squeaky BB

Replaced the original BB on my All-Road after 3,800 miles. Quick delivery, easy install, and no more squeaks!

K
Kris (Julesburg, US)
An Easy Fix

If your bottom bracket bearings are wearing out this is a cheap and easy fix. I used an instructional video from Park Tool and a few tools from a generic specialty bike tools kit worth about $45. The only hiccup was having to use a bolt with a couple nuts locked together on it to connect the little torque wrench to the 10 mm hex tool entry on the preload nut to be sure it got the right torque. A 10 mm hex driver bit is not a standard tool.

T
Tstew5965@gmail.com (Meadville, US)
BSA DUB bottom bracket

Today I rode 21 miles with plenty of good elevation gain and this being my second ride with the new BB installed it felt like butter!!! The original drive side bearing was shot after approximately 500 miles. I’m wondering if the cause maybe is the fact the spindle is 29mm and the threaded shell is 42 mm leaving very little room for bearings of any size thus wearing out quickly???? I think this DUB setup originates from SRAM?? If the bottom brackets continue to wear out quickly I may change the front drive train to accept non DUB bottom brackets. Overall I am enthralled with the 4130 All Road!!!!!

T
Timothy Packard (Lewiston, US)
Great product!

I got a state 4130 all road about this time last year and I have put about 2700 miles on the bike. The bike to begin with has been an amazing purchase based on the limited amount of maintenance I have had to do. Any of the parts I replaced I simply bought directly from state, this bottom bracket being one of them. It was easy to replace and brought back the smooth like new feel to my cranks.

S
Suppachai Maskasem (Miami, US)
BSA bottom bracket

It works great. Cheap and great=Happy cyclist :)

C
Chris Ledeboer (Mount Vernon, US)
Bottom bracket

Looks good, works well, easy to install! Very satisfied

BSA 68mm Bottom Bracket (Threaded)
Explore On and Off-Road

Explore Your State

$19.99

6743888822359
$24.99

or
Pay Per Month
DetailsFAQ

This bottom bracket is designed to work with 68mm threaded bottom brackets including our Essor Aerodash and other BSA compatible cranks

What’s included:

  • Bottom Bracket : Hollow Axle BSA 68mm

RISK-FREE PURCHASE- State Bicycle Co. offers FREE EXCHANGES* -If this item doesn't work out, we'll send you a return label and exchange for free!


RETURNS & EXCHANGES:
You have 30 days from receiving your order to request a return or exchange. Return shipping fees may apply. Some items are final sale / non-returnable.
Add the Package Protection Plan at checkout for free return labels, free exchanges, extended 60-day window, and coverage for loss/theft/damage in transit.
View full Return Policy .

SHIPPING:
Most in-stock items ship within 1 business day. You’ll receive tracking as soon as it goes out.
Learn more: Shipping Policy.

ASSEMBLY:
Complete bikes ship ~90% assembled, but final setup and tuning should be done by a professional mechanic. This keeps you safe and helps validate your warranty.
WARRANTY: Warranty activates when you submit proof of professional assembly.

  • 5-year warranty on all bicycle frames
  • 1-year warranty on non-consumable parts
  • 2-year warranty on Essor USA products

Details: Warranty Policy.

SIZE CHARTS & SPECS:
Need fit or tech info? Find detailed geometry charts, size guides, and build specs here:
Size Charts & Specs.

SUPPORT:
Have a question or an issue with your order (damaged in shipping, missing items, etc.)?
Reach out and our team will take care of you:
Contact Us or email info@statebicycle.com.

Customer Reviews

Based on 7 reviews
86%
(6)
14%
(1)
0%
(0)
0%
(0)
0%
(0)
j
james omalley (Dallas, US)
Reliability 4031 bike

The crank bearing gave out at about 4000 miles, so I guess that is OK. But the derailler that came with the bike started failing on the GAP and C&O trail ride with about 2000 miles on it. The bike shop told me that another supplier had better kit and replaced it with non OEM, 2000 mile now it still works. Also I have 700c and 650B wheel set and am having major spoke issues, they started at about 1000 miles for each wheel set (it sucks to have failure on the trail), my mass is 200 lbs, and I also have packs for the bike. So their is room for improvement with the State 4130, reliability should be the highest priority, if we wanted speed we would buy another manufactures bike.

A
Aaron Granquist (Denver, US)
No More Squeaky BB

Replaced the original BB on my All-Road after 3,800 miles. Quick delivery, easy install, and no more squeaks!

K
Kris (Julesburg, US)
An Easy Fix

If your bottom bracket bearings are wearing out this is a cheap and easy fix. I used an instructional video from Park Tool and a few tools from a generic specialty bike tools kit worth about $45. The only hiccup was having to use a bolt with a couple nuts locked together on it to connect the little torque wrench to the 10 mm hex tool entry on the preload nut to be sure it got the right torque. A 10 mm hex driver bit is not a standard tool.

T
Tstew5965@gmail.com (Meadville, US)
BSA DUB bottom bracket

Today I rode 21 miles with plenty of good elevation gain and this being my second ride with the new BB installed it felt like butter!!! The original drive side bearing was shot after approximately 500 miles. I’m wondering if the cause maybe is the fact the spindle is 29mm and the threaded shell is 42 mm leaving very little room for bearings of any size thus wearing out quickly???? I think this DUB setup originates from SRAM?? If the bottom brackets continue to wear out quickly I may change the front drive train to accept non DUB bottom brackets. Overall I am enthralled with the 4130 All Road!!!!!

T
Timothy Packard (Lewiston, US)
Great product!

I got a state 4130 all road about this time last year and I have put about 2700 miles on the bike. The bike to begin with has been an amazing purchase based on the limited amount of maintenance I have had to do. Any of the parts I replaced I simply bought directly from state, this bottom bracket being one of them. It was easy to replace and brought back the smooth like new feel to my cranks.

S
Suppachai Maskasem (Miami, US)
BSA bottom bracket

It works great. Cheap and great=Happy cyclist :)

C
Chris Ledeboer (Mount Vernon, US)
Bottom bracket

Looks good, works well, easy to install! Very satisfied