SBC All-Road Carbon Hydraulic Shift / Brake System - 12 Speed
SBC All-Road Carbon Hydraulic Shift / Brake System - 12 Speed
SBC All-Road Carbon Hydraulic Shift / Brake System - 12 Speed

SBC All-Road Carbon Hydraulic Shift / Brake System - 12 Speed

Hydraulic Power, Carbon Feel

A complete 1x12 hydraulic shift and brake system with carbon lever blades - two levers, two flat-mount calipers, front and rear. Mineral oil, not DOT.
7846421790807

or
Pay Per Month
SBC All-Road Carbon Hydraulic Shift / Brake System - 12 Speed

Hydraulic braking and carbon lever blades, sold as a complete set. Two levers, two calipers, hoses fitted and cut to length — front and rear. This is the brake and shift package we build onto our own All‑Road bikes, offered here as a set you can put on yours.

The right lever brakes and shifts twelve speeds. The left lever is a brake only, the way a 1x drop‑bar bike should be. Both blades are carbon.


Why hydraulic is the upgrade

A cable brake loses force to friction before it ever reaches the pad. Housing drags, cables stretch, and the lever gets vaguer as the pads wear. A sealed hydraulic line does not compress, so what your hand does at the lever is what the pad does at the rotor — and it keeps doing it in the rain, in grit, and at the bottom of a long descent.

Two things you notice first. One-finger braking: full stopping power without pulling hard, which matters on a drop bar where you are braking from the hoods. Modulation: the useful part of the lever stroke is long, so you can hold a wheel just short of locking instead of choosing between coasting and skidding. On loose gravel that is the difference between steering and sliding.

The pistons also self-adjust as the pads wear. There is no barrel adjuster to chase every few hundred miles.

Carbon lever blades

Carbon, not aluminum. The blades are stiff where you pull on them, so lever feel stays crisp rather than flexing and swallowing part of the stroke, and they shed a little weight at the far end of the bar where you feel it most. Reach is adjustable, so a smaller hand can bring the blade closer and still brake from the hoods.

The left lever is 236g and the right is 270g — 506g the pair. The 34g difference is the shift mechanism inside the right lever; the left has nothing in it but the master cylinder.


Mineral oil — never DOT

This system runs on mineral oil. Shimano mineral oil is the easy answer: it is on the shelf at every shop, it is what most people already have, and it works here. Any quality mineral-oil brake fluid will do.

Do not put DOT fluid in these brakes. DOT 4, DOT 5.1 and the rest are used by SRAM, Hayes and Formula, and they will swell and destroy the seals in a mineral-oil system. The damage is not reversible with a bleed — it means new calipers and new levers. If you are not certain what is in the bottle, do not use it.

The rear hose arrives at 1600mm, which is longer than most frames need. If you shorten it, the brake has to be re-bled afterward — budget for a bleed kit and mineral oil, or have a shop do it. The front hose at 900mm fits most forks as delivered.


What it shifts

The right lever is indexed for 1x12, with three upshifts on a full sweep and one downshift per click. It is a cable shifter, so the rear derailleur has to share its cable pull:

  • State Bicycle Co. All-Road 12-speed — our own drivetrain. This is what the set is built for.
  • Sensah SRX / SRX PRO 1x12 rear derailleurs.

Anything else is a different pull ratio and will not index correctly. Specifically, this will not run SRAM AXS or XPLR AXS, or Shimano Di2 — those are electronic and have no cable to pull — and it is not a drop-in for Shimano's 12-speed road groups or SRAM Eagle.

The braking half does not care what you shift with. If you are running a drivetrain that is not on the list above, the set still works as a pure hydraulic brake package — two levers, two calipers, front and rear. You simply do not use the shift mechanism in the right lever. Any bike with flat-mount tabs can take it.

Flat mount, front and rear

Both calipers are flat mount, the standard on current road and gravel frames. They will not bolt to a post-mount frame or fork without an adapter, and not every post-mount frame has one available. Mounting bolts are included: M5 × 15 at the front, M5 × 35 at the rear. Rotor size depends on your frame and fork and the adapter they call for — check what yours is specified to take before ordering.


In the set

  • Left lever — brake only, carbon blade
  • Right lever — brake and 12-speed shift, carbon blade
  • Front caliper — 900mm hydraulic hose, M5 × 15 mounting bolts
  • Rear caliper — 1600mm hydraulic hose, M5 × 35 mounting bolts
  • Brake pads installed

Rotors, rotor adapters, shift cable housing, bar tape and mineral oil are not included.


Specifications

Sold as Complete set — two levers, two calipers
Drivetrain speeds 1x12
Left lever Brake only
Right lever Brake and 12-speed shift
Lever blades Carbon
Reach adjustable Yes
Lever weights 236g left, 270g right — 506g the pair
Shift pattern 3 up on a full sweep, 1 down
Pull compatibility State Bicycle Co. All-Road 12sp, Sensah SRX 1x12
Brake type Hydraulic disc
Brake fluid Mineral oil — never DOT
Caliper mount Flat mount, front and rear
Front hose 900mm
Rear hose 1600mm
Mounting bolts M5 × 15 front, M5 × 35 rear

RISK-FREE PURCHASE- State Bicycle Co. offers FREE EXCHANGES* -If this item doesn't work out, we'll send you a return label and exchange for free!

Original equipment parts. This is the same lever and caliper set we fit to State Bicycle Co. complete bikes, offered here as a set for upgrades, builds and replacement.

FAQ


RETURNS & EXCHANGES:
You have 30 days from receiving your order to request a return or exchange. Return shipping fees may apply. Some items are final sale / non-returnable.
Add the Package Protection Plan at checkout for free return labels, free exchanges, extended 60-day window, and coverage for loss/theft/damage in transit.
View full Return Policy .

SHIPPING:
Most in-stock items ship within 1 business day. You’ll receive tracking as soon as it goes out.
Learn more: Shipping Policy.

ASSEMBLY:
Complete bikes ship ~90% assembled, but final setup and tuning should be done by a professional mechanic. This keeps you safe and helps validate your warranty.
WARRANTY: Warranty activates when you submit proof of professional assembly.

  • 5-year warranty on all bicycle frames
  • 1-year warranty on non-consumable parts
  • 2-year warranty on Essor USA products

Details: Warranty Policy.

SIZE CHARTS & SPECS:
Need fit or tech info? Find detailed geometry charts, size guides, and build specs here:
Size Charts & Specs.

SUPPORT:
Have a question or an issue with your order (damaged in shipping, missing items, etc.)?
Reach out and our team will take care of you:
Contact Us or email info@statebicycle.com.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)